BE - 0313 Dense White Opal Stringer
This product is sold out
Threads of glass pulled from re-melted Bullseye Compatible sheet. For use in kilnforming or torchworking.
Stringers come in 0.5 mm (“Fine Line”), 1 mm, and 2 mm thicknesses and are approximately 17.75" (451 mm) long. They are packed in clear plastic tubes that are 18" (457 mm) long and 0.75" (19 mm) in diameter.
May React With
This glass can be unstable when subjected to extended heatwork (pattern bars, pot melts, boiled effect, kilncasting, etc.). Firing above 1500°F (815°C) for more than 15 minutes or firing slowly between 1250°F (677°C) and 1500°F (815°C) may result in an unstable glass. More susceptible to contaminants that seed devitrification than other glasses in the Bullseye line. Cap with clear or plan to treat the surface (sandblast, coldwork, or apply clear powder and refire) after firing.
No color shift upon firing. A dark interface reaction is possible with sulfur-bearing glasses (001137, 000137).